exiv2 - en to unknown language translation catalogue (284 entries)

en: "Color Noise Reducton" setting. Range 0 to +100.
target: "Colour Noise Reducton" setting. Range 0 to +100.

en: 3-area (center)
target: 3-area (centre)

en: 35 mm equivalent
target: 35mm equivalent

en: A PLUS-standardized alphanumeric code string summarizing the media usages included in the license.
target: A PLUS-standardised alphanumeric code string summarising the media usages included in the licence.

en: A UTF-8 encoded string associated with the CameraCalibration1 and CameraCalibration2 tags. The CameraCalibration1 and CameraCalibration2 tags should only be used in the DNG color transform if the string stored in the CameraCalibrationSignature tag exactly matches the string stored in the ProfileCalibrationSignature tag for the selected camera profile.
target: A UTF-8 encoded string associated with the CameraCalibration1 and CameraCalibration2 tags. The CameraCalibration1 and CameraCalibration2 tags should only be used in the DNG colour transform if the string stored in the CameraCalibrationSignature tag exactly matches the string stored in the ProfileCalibrationSignature tag for the selected camera profile.

en: A UTF-8 encoded string associated with the camera profile tags. The CameraCalibration1 and CameraCalibration2 tags should only be used in the DNG color transfer if the string stored in the CameraCalibrationSignature tag exactly matches the string stored in the ProfileCalibrationSignature tag for the selected camera profile.
target: A UTF-8 encoded string associated with the camera profile tags. The CameraCalibration1 and CameraCalibration2 tags should only be used in the DNG colour transfer if the string stored in the CameraCalibrationSignature tag exactly matches the string stored in the ProfileCalibrationSignature tag for the selected camera profile.

en: A binary number identifying the version of the Information Interchange Model, Part I, utilised by the provider. Version numbers are assigned by IPTC and NAA organizations.
target: A binary number identifying the version of the Information Interchange Model, Part I, utilised by the provider. Version numbers are assigned by IPTC and NAA organisations.

en: A binary number identifying the version of the Information Interchange Model, Part II, utilised by the provider. Version numbers are assigned by IPTC and NAA organizations.
target: A binary number identifying the version of the Information Interchange Model, Part II, utilised by the provider. Version numbers are assigned by IPTC and NAA organisations.

en: A binary number representing the file format of the object data preview. The file format must be registered with IPTC or NAA organizations with a unique number assigned to it.
target: A binary number representing the file format of the object data preview. The file format must be registered with IPTC or NAA organisations with a unique number assigned to it.

en: A color in CMYK or RGB to be used as the pre-multiple color when alpha mode is pre-multiplied.
target: A colour in CMYK or RGB to be used as the pre-multiple colour when alpha mode is pre-multiplied.

en: A color map for palette color images. This field defines a Red-Green-Blue color map (often called a lookup table) for palette-color images. In a palette-color image, a pixel value is used to index into an RGB lookup table.
target: A colour map for palette colour images. This field defines a Red-Green-Blue colour map (often called a lookup table) for palette-colour images. In a palette-colour image, a pixel value is used to index into an RGB lookup table.

en: A description of the speaker angles from center front in degrees. For example: "Left = -30, Right = 30, Center = 0, LFE = 45, Left Surround = -110, Right Surround = 110"
target: A description of the speaker angles from centre front in degrees. For example: "Left = -30, Right = 30, Centre = 0, LFE = 45, Left Surround = -110, Right Surround = 110"

en: A number that indicates a document's status relative to other documents, used to organize documents in a file browser. Values are user-defined within an application-defined range.
target: A number that indicates a document's status relative to other documents, used to organise documents in a file browser. Values are user-defined within an application-defined range.

en: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
target: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: A word or short phrase that identifies a document as a member of a user-defined collection. Used to organize documents in a file browser.
target: A word or short phrase that identifies a document as a member of a user-defined collection. Used to organise documents in a file browser.

en: Additional constraints on the license.
target: Additional constraints on the licence.

en: Additional license conditions.
target: Additional licence conditions.

en: Additional license information.
target: Additional licence information.

en: Additional license requirements.
target: Additional licence requirements.

en: An alternative tape name, set via the project window or timecode dialog in Premiere. If an alternative name has been set and has not been reverted, that name is displayed.
target: An alternative tape name, set via the project window or timecode dialogue in Premiere. If an alternative name has been set and has not been reverted, that name is displayed.

en: An entity responsible for making the resource available. Examples of a Publisher include a person, an organization, or a service. Typically, the name of a Publisher should be used to indicate the entity.
target: An entity responsible for making the resource available. Examples of a Publisher include a person, an organisation, or a service. Typically, the name of a Publisher should be used to indicate the entity.

en: An ordered array of colorants (swatches) that are used in the document (including any in contained documents).
target: An ordered array of colourants (swatches) that are used in the document (including any in contained documents).

en: Analog Balance
target: Analogue Balance

en: Blue color balance
target: Blue colour balance

en: Bottom-center
target: Bottom-centre

en: Bottom-center (horizontal)
target: Bottom-centre (horizontal)

en: Bottom-center (vertical)
target: Bottom-centre (vertical)

en: CFA Plane Color
target: CFA Plane Colour

en: CM White Balance Gray Point
target: CM White Balance Grey Point

en: CM white balance gray point
target: CM white balance grey point

en: CameraCalibration2 defines a calibration matrix that transforms reference camera native space values to individual camera native space values under the second calibration illuminant. The matrix is stored in row scan order. This matrix is stored separately from the matrix specified by the ColorMatrix2 tag to allow raw converters to swap in replacement color matrices based on UniqueCameraModel tag, while still taking advantage of any per-individual camera calibration performed by the camera manufacturer.
target: CameraCalibration2 defines a calibration matrix that transforms reference camera native space values to individual camera native space values under the second calibration illuminant. The matrix is stored in row scan order. This matrix is stored separately from the matrix specified by the ColourMatrix2 tag to allow raw converters to swap in replacement colour matrices based on UniqueCameraModel tag, while still taking advantage of any per-individual camera calibration performed by the camera manufacturer.

en: CameraClalibration1 defines a calibration matrix that transforms reference camera native space values to individual camera native space values under the first calibration illuminant. The matrix is stored in row scan order. This matrix is stored separately from the matrix specified by the ColorMatrix1 tag to allow raw converters to swap in replacement color matrices based on UniqueCameraModel tag, while still taking advantage of any per-individual camera calibration performed by the camera manufacturer.
target: CameraClalibration1 defines a calibration matrix that transforms reference camera native space values to individual camera native space values under the first calibration illuminant. The matrix is stored in row scan order. This matrix is stored separately from the matrix specified by the ColourMatrix1 tag to allow raw converters to swap in replacement colour matrices based on UniqueCameraModel tag, while still taking advantage of any per-individual camera calibration performed by the camera manufacturer.

en: CatalogSets
target: CatalogueSets

en: Center
target: Centre

en: Center (horizontal)
target: Centre (horizontal)

en: Center (vertical)
target: Centre (vertical)

en: Center AF
target: Centre AF

en: Center Weighted
target: Centre Weighted

en: Center weighted
target: Centre weighted

en: Center weighted average
target: Centre weighted average

en: Center zone (horizontal orientation)
target: Centre zone (horizontal orientation)

en: Center zone (vertical orientation)
target: Centre zone (vertical orientation)

en: Center-weighted average
target: Centre-weighted average

en: Centered
target: Centred

en: ChromaBlurRadius provides a hint to the DNG reader about how much chroma blur should be applied to the image. If this tag is omitted, the reader will use its default amount of chroma blurring. Normally this tag is only included for non-CFA images, since the amount of chroma blur required for mosaic images is highly dependent on the de-mosaic algorithm, in which case the DNG reader's default value is likely optimized for its particular de-mosaic algorithm.
target: ChromaBlurRadius provides a hint to the DNG reader about how much chroma blur should be applied to the image. If this tag is omitted, the reader will use its default amount of chroma blurring. Normally this tag is only included for non-CFA images, since the amount of chroma blur required for mosaic images is highly dependent on the de-mosaic algorithm, in which case the DNG reader's default value is likely optimised for its particular de-mosaic algorithm.

en: Color
target: Colour

en: Color Adjustment
target: Colour Adjustment

en: Color Balance
target: Colour Balance

en: Color Balance Blue
target: Colour Balance Blue

en: Color Balance Green
target: Colour Balance Green

en: Color Balance Red
target: Colour Balance Red

en: Color Compensation Filter
target: Colour Compensation Filter

en: Color Compensation Filter: negative is green, positive is magenta
target: Colour Compensation Filter: negative is green, positive is magenta

en: Color Control
target: Colour Control

en: Color Data
target: Colour Data

en: Color Effect
target: Colour Effect

en: Color Filter
target: Colour Filter

en: Color Filter Array
target: Colour Filter Array

en: Color Filter Array Pattern
target: Colour Filter Array Pattern

en: Color Hue
target: Colour Hue

en: Color Label
target: Colour Label

en: Color Map
target: Colour Map

en: Color Matrix
target: Colour Matrix

en: Color Matrix 1
target: Colour Matrix 1

en: Color Matrix 2
target: Colour Matrix 2

en: Color Matrix Number
target: Colour Matrix Number

en: Color Matrix2
target: Colour Matrix2

en: Color Mode
target: Colour Mode

en: Color Noise Reduction
target: Colour Noise Reduction

en: Color Profile
target: Colour Profile

en: Color Reproduction
target: Colour Reproduction

en: Color Space
target: Colour Space

en: Color Temperature
target: Colour Temperature

en: Color Temperature Setting
target: Colour Temperature Setting

en: Color Temperature/Color Filter
target: Colour Temperature/Colour Filter

en: Color Tone
target: Colour Tone

en: Color adjustment
target: Colour adjustment

en: Color balance
target: Colour balance

en: Color balance blue
target: Colour balance blue

en: Color balance green
target: Colour balance green

en: Color balance red
target: Colour balance red

en: Color compensation filter
target: Colour compensation filter

en: Color compensation filter: negative is green, positive is magenta
target: Colour compensation filter: negative is green, positive is magenta

en: Color control
target: Colour control

en: Color custom
target: Colour custom

en: Color data
target: Colour data

en: Color effect
target: Colour effect

en: Color effects
target: Colour effects

en: Color filter
target: Colour filter

en: Color hue
target: Colour hue

en: Color matrix
target: Colour matrix

en: Color matrix 2
target: Colour matrix 2

en: Color matrix mumber
target: Colour matrix mumber

en: Color mode
target: Colour mode

en: Color profile
target: Colour profile

en: Color sequential area
target: Colour sequential area

en: Color sequential linear
target: Colour sequential linear

en: Color space
target: Colour space

en: Color temperature
target: Colour temperature

en: Color temperature setting
target: Colour temperature setting

en: Color tone
target: Colour tone

en: ColorInfo
target: ColourInfo

en: ColorMatrix1 defines a transformation matrix that converts XYZ values to reference camera native color space values, under the first calibration illuminant. The matrix values are stored in row scan order. The ColorMatrix1 tag is required for all non-monochrome DNG files.
target: ColourMatrix1 defines a transformation matrix that converts XYZ values to reference camera native colour space values, under the first calibration illuminant. The matrix values are stored in row scan order. The ColourMatrix1 tag is required for all non-monochrome DNG files.

en: ColorMatrix2 defines a transformation matrix that converts XYZ values to reference camera native color space values, under the second calibration illuminant. The matrix values are stored in row scan order.
target: ColourMatrix2 defines a transformation matrix that converts XYZ values to reference camera native colour space values, under the second calibration illuminant. The matrix values are stored in row scan order.

en: ColorMode
target: ColourMode

en: ColorSpace
target: Colour Space

en: ColorTemperature
target: ColourTemperature

en: Colorant structure
target: Colourant structure

en: Colorants
target: Colourants

en: Colorimetric Reference
target: Colourimetric Reference

en: Colort temperature
target: Colourt temperature

en: Constraints limiting the scope of PLUS Media Usage/s included in the license to particular named media or to media not yet specifically defined in the PLUS Media Matrix.
target: Constraints limiting the scope of PLUS Media Usage/s included in the licence to particular named media or to media not yet specifically defined in the PLUS Media Matrix.

en: Constraints limiting the scope of geographic distribution to specific cities, states, provinces or other areas to be included in or excluded from the PLUS Regions specified in the Media Usages specified in the license.
target: Constraints limiting the scope of geographic distribution to specific cities, states, provinces or other areas to be included in or excluded from the PLUS Regions specified in the Media Usages specified in the licence.

en: Constraints on alteration of the image by cropping, flipping, retouching, colorization, de-colorization or merging.
target: Constraints on alteration of the image by cropping, flipping, retouching, colourisation, de-colourisation or merging.

en: Contains an InterColor Consortium (ICC) format color space characterization/profile
target: Contains an InterColour Consortium (ICC) format colour space characterisation/profile

en: Contains the rasterized object data description and is used where characters that have not been coded are required for the caption.
target: Contains the rasterised object data description and is used where characters that have not been coded are required for the caption.

en: Contains two values representing the minimum rows and columns to define the repeating patterns of the color filter array
target: Contains two values representing the minimum rows and columns to define the repeating patterns of the colour filter array

en: Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organization claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., "Copyright, John Smith, 19xx. All rights reserved.". In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case since the statement also ends with a NULL, there are two NULL codes). When only the photographer copyright is given, it is terminated by one NULL code . When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given. When the field is left blank, it is treated as unknown.
target: Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organisation claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., "Copyright, John Smith, 19xx. All rights reserved.". In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case since the statement also ends with a NULL, there are two NULL codes). When only the photographer copyright is given, it is terminated by one NULL code . When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given. When the field is left blank, it is treated as unknown.

en: D-Range Optimizer Bracketing Low
target: D-Range Optimiser Bracketing Low

en: Date and Time (digitized)
target: Date and Time (digitised)

en: Date and Time Digitized
target: Date and Time Digitised

en: Defines a unique, non-localized name for the camera model that created the image in the raw file. This name should include the manufacturer's name to avoid conflicts, and should not be localized, even if the camera name itself is localized for different markets (see LocalizedCameraModel). This string may be used by reader software to index into per-model preferences and replacement profiles.
target: Defines a unique, non-localised name for the camera model that created the image in the raw file. This name should include the manufacturer's name to avoid conflicts, and should not be localised, even if the camera name itself is localised for different markets (see LocalizedCameraModel). This string may be used by reader software to index into per-model preferences and replacement profiles.

en: Descriptive markers of catalog items by content
target: Descriptive markers of catalogue items by content

en: Digital Image Stabilization
target: Digital Image Stabilisation

en: Digitization Date
target: Digitisation Date

en: Digitization Time
target: Digitisation Time

en: Duplication Only as Necessary Under License
target: Duplication Only as Necessary Under Licence

en: Dynamic (color)
target: Dynamic (colour)

en: Dynamic Range Optimizer
target: Dynamic Range Optimiser

en: Dynamic Range Optimizer Level
target: Dynamic Range Optimiser Level

en: Dynamic Range Optimizer Mode
target: Dynamic Range Optimiser Mode

en: Dynamic Range Optimizer Settings
target: Dynamic Range Optimiser Settings

en: Dynamic range optimizer mode
target: Dynamic range optimiser mode

en: EXIF tag 37386, 0x920A. Focal length of the lens, in millimeters.
target: EXIF tag 37386, 0x920A. Focal length of the lens, in millimetres.

en: EXIF tag 40961, 0xA001. Color space information
target: EXIF tag 40961, 0xA001. Colour space information

en: EXIF tag 41730, 0xA302. Color filter array geometric pattern of the image sense.
target: EXIF tag 41730, 0xA302. Colour filter array geometric pattern of the image sense.

en: Exif Resolution
target: Exif resolution

en: ExpirationTime
target: Expiration Time

en: File format of the image file delivered to the Licensee for use under the license.
target: File format of the image file delivered to the Licensee for use under the licence.

en: FinePix Color
target: FinePix Colour

en: Fixed Center
target: Fixed Centre

en: Fixed Center or multiple
target: Fixed Centre or multiple

en: Flash Color Filter
target: Flash Colour Filter

en: Flash color filter
target: Flash colour filter

en: Fuji FinePix color setting
target: Fuji FinePix colour setting

en: GPS tag 6, 0x06. Indicates altitude in meters.
target: GPS tag 6, 0x06. Indicates altitude in metres.

en: Gray Point
target: Grey Point

en: Gray point
target: Grey point

en: Gray scale
target: Greyscale

en: Image Optimization
target: Image Optimisation

en: Image Stabilization
target: Image Stabilisation

en: Image Stabilization A100
target: Image Stabilisation A100

en: Image Stabilization Data
target: Image Stabilisation Data

en: Image Stabilization for the Sony DSLR-A100
target: Image Stabilisation for the Sony DSLR-A100

en: Image optimization
target: Image optimisation

en: Image stabilization
target: Image stabilisation

en: Image stabilization data
target: Image stabilisation data

en: Indexed images are images where the 'pixels' do not represent color values, but rather an index (usually 8-bit) into a separate color table, the ColorMap.
target: Indexed images are images where the 'pixels' do not represent colour values, but rather an index (usually 8-bit) into a separate colour table, the ColourMap.

en: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is meters.
target: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is metres.

en: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GSPAltitude tag. The reference unit is meters. Note that this tag is BYTE type, unlike other reference tags.
target: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GSPAltitude tag. The reference unit is metres. Note that this tag is BYTE type, unlike other reference tags.

en: Indicates the color components of an image.
target: Indicates the colour components of an image.

en: Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods
target: Indicates the colour filter array (CFA) geometric pattern of the image sensor when a one-chip colour area sensor is used. It does not apply to all sensing methods

en: Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods.
target: Indicates the colour filter array (CFA) geometric pattern of the image sensor when a one-chip colour area sensor is used. It does not apply to all sensing methods.

en: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the center of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and second indicates the Y row number.
target: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the centre of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and second indicates the Y row number.

en: Indicates the unit used to express the GPS receiver speed of movement. "K" "M" and "N" represents kilometers per hour, miles per hour, and knots.
target: Indicates the unit used to express the GPS receiver speed of movement. "K" "M" and "N" represents kilometres per hour, miles per hour, and knots.

en: Indicates the unit used to express the distance to the destination point. "K", "M" and "N" represent kilometers, miles and knots.
target: Indicates the unit used to express the distance to the destination point. "K", "M" and "N" represent kilometres, miles and knots.

en: Indicates whether a license is a repeat or an initial license.  Reuse may require that licenses stored in files previously delivered to the customer be updated.
target: Indicates whether a licence is a repeat or an initial license.  Reuse may require that licenses stored in files previously delivered to the customer be updated.

en: Inter Color Profile
target: Inter Colour Profile

en: JBIG Color
target: JBIG Colour

en: Kilometers
target: Kilometres

en: LensModel
target: Lens Model

en: License End Date
target: Licence End Date

en: License ID
target: Licence ID

en: License Start Date
target: Licence Start Date

en: License Transaction Date
target: Licence Transaction Date

en: Linearization Table
target: Linearisation Table

en: Linearization table
target: Linearisation table

en: Localized Camera Model
target: Localised Camera Model

en: Maximum Aperture at Maxinimum Focal
target: Maximum Aperture at Maximum Focal

en: Maximum aperture at maxinimum focal
target: Maximum aperture at maximum focal

en: Measured Color
target: Measured Colour

en: Measured color
target: Measured colour

en: Memory Color Emphasis
target: Memory Colour Emphasis

en: Memory color emphasis
target: Memory colour emphasis

en: My Colors
target: My Colours

en: My color data
target: My colour data

en: Name of the image file delivered to the Licensee for use under the license.
target: Name of the image file delivered to the Licensee for use under the licence.

en: Natural Color
target: Natural Colour

en: Natural color
target: Natural colour

en: Nature (color)
target: Nature (colour)

en: No Colorization
target: No Colourisation

en: No De-Colorization
target: No De-Colourisation

en: Normally the stored raw values are not white balanced, since any digital white balancing will reduce the dynamic range of the final image if the user decides to later adjust the white balance; however, if camera hardware is capable of white balancing the color channels before the signal is digitized, it can improve the dynamic range of the final image. AnalogBalance defines the gain, either analog (recommended) or digital (not recommended) that has been applied the stored raw values.
target: Normally the stored raw values are not white balanced, since any digital white balancing will reduce the dynamic range of the final image if the user decides to later adjust the white balance; however, if camera hardware is capable of white balancing the colour channels before the signal is digitised, it can improve the dynamic range of the final image. AnalogueBalance defines the gain, either analogue (recommended) or digital (not recommended) that has been applied the stored raw values.

en: One-chip color area
target: One-chip colour area

en: Optional PLUS-ID assigned by the Licensor to the License.
target: Optional PLUS-ID assigned by the Licensor to the Licence.

en: Other License Conditions
target: Other Licence Conditions

en: Other License Documents
target: Other Licence Documents

en: Other License Info
target: Other Licence Info

en: Other License Requirements
target: Other Licence Requirements

en: PLUS License Data Format schema
target: PLUS Licence Data Format schema

en: Pale & Light Color
target: Pale & Light Colour

en: Party or parties granting the license to the Licensee.
target: Party or parties granting the licence to the Licensee.

en: Party or parties to whom the license is granted by the Licensor/s under the license transaction.
target: Party or parties to whom the licence is granted by the Licensor/s under the licence transaction.

en: Party or parties ultimately making use of the image under the license.
target: Party or parties ultimately making use of the image under the licence.

en: Preview Color Space
target: Preview Colour Space

en: Randomized process
target: Randomised process

en: Rasterized Caption
target: Rasterised Caption

en: Raw Image Center
target: Raw Image Centre

en: Raw image center
target: Raw image centre

en: Red color balance
target: Red colour balance

en: ReductionMatrix1 defines a dimensionality reduction matrix for use as the first stage in converting color camera native space values to XYZ values, under the first calibration illuminant. This tag may only be used if ColorPlanes is greater than 3. The matrix is stored in row scan order.
target: ReductionMatrix1 defines a dimensionality reduction matrix for use as the first stage in converting colour camera native space values to XYZ values, under the first calibration illuminant. This tag may only be used if ColourPlanes is greater than 3. The matrix is stored in row scan order.

en: ReductionMatrix2 defines a dimensionality reduction matrix for use as the first stage in converting color camera native space values to XYZ values, under the second calibration illuminant. This tag may only be used if ColorPlanes is greater than 3. The matrix is stored in row scan order.
target: ReductionMatrix2 defines a dimensionality reduction matrix for use as the first stage in converting colour camera native space values to XYZ values, under the second calibration illuminant. This tag may only be used if ColourPlanes is greater than 3. The matrix is stored in row scan order.

en: Reference information for additional documents associated with the license.
target: Reference information for additional documents associated with the licence.

en: Similar to the UniqueCameraModel field, except the name can be localized for different markets to match the localization of the camera name.
target: Similar to the UniqueCameraModel field, except the name can be localised for different markets to match the localisation of the camera name.

en: Smooth (color)
target: Smooth (colour)

en: Solarization
target: Solarisation

en: Some sensors have an unpredictable non-linearity in their response as they near the upper limit of their encoding range. This non-linearity results in color shifts in the highlight areas of the resulting image unless the raw converter compensates for this effect. LinearResponseLimit specifies the fraction of the encoding range above which the response may become significantly non-linear.
target: Some sensors have an unpredictable non-linearity in their response as they near the upper limit of their encoding range. This non-linearity results in colour shifts in the highlight areas of the resulting image unless the raw converter compensates for this effect. LinearResponseLimit specifies the fraction of the encoding range above which the response may become significantly non-linear.

en: Specifies one or more Subjects from the IPTC "Subject-NewsCodes" taxonomy to categorize the content. Each Subject is represented as a string of 8 digits in an unordered list.
target: Specifies one or more Subjects from the IPTC "Subject-NewsCodes" taxonomy to categorise the content. Each Subject is represented as a string of 8 digits in an unordered list.

en: Specifies the selected white balance at time of capture, encoded as the coordinates of a perfectly neutral color in linear reference space values. The inclusion of this tag precludes the inclusion of the AsShotWhiteXY tag.
target: Specifies the selected white balance at time of capture, encoded as the coordinates of a perfectly neutral colour in linear reference space values. The inclusion of this tag precludes the inclusion of the AsShotWhiteXY tag.

en: Standard (color)
target: Standard (colour)

en: Sub-seconds Time Digitized
target: Sub-seconds Time Digitised

en: Summarizes the availability and scope of model releases authorizing usage of the likenesses of persons appearing in the photograph.
target: Summarises the availability and scope of model releases authorising usage of the likenesses of persons appearing in the photograph.

en: Summarizes the availability and scope of property releases authorizing usage of the properties appearing in the photograph.
target: Summarises the availability and scope of property releases authorising usage of the properties appearing in the photograph.

en: TIFF tag 319, 0x13F. Chromaticity of the three primary colors.
target: TIFF tag 319, 0x13F. Chromaticity of the three primary colours.

en: TIFF tag 531, 0x213. Position of chrominance vs. luminance components: 1 = centered; 2 = co-sited.
target: TIFF tag 531, 0x213. Position of chrominance vs. luminance components: 1 = centred; 2 = co-sited.

en: Terms and Conditions applying to the license.
target: Terms and Conditions applying to the licence.

en: The DNG color model documents a transform between camera colors and CIE XYZ values. This tag describes the colorimetric reference for the CIE XYZ values. 0 = The XYZ values are scene-referred. 1 = The XYZ values are output-referred, using the ICC profile perceptual dynamic range. This tag allows output-referred data to be stored in DNG files and still processed correctly by DNG readers.
target: The DNG colour model documents a transform between camera colours and CIE XYZ values. This tag describes the colorimetric reference for the CIE XYZ values. 0 = The XYZ values are scene-referred. 1 = The XYZ values are output-referred, using the ICC profile perceptual dynamic range. This tag allows output-referred data to be stored in DNG files and still processed correctly by DNG readers.

en: The DataSet identifies the Abstract Relationship Method identifier (ARM) which is described in a document registered by the originator of the ARM with the IPTC and NAA organizations.
target: The DataSet identifies the Abstract Relationship Method identifier (ARM) which is described in a document registered by the originator of the ARM with the IPTC and NAA organisations.

en: The chromaticity of the three primary colors of the image. Normally this tag is not necessary, since colorspace is specified in the colorspace information tag (<ColorSpace>).
target: The chromaticity of the three primary colours of the image. Normally this tag is not necessary, since colourspace is specified in the colourspace information tag (<ColorSpace>).

en: The chromaticity of the white point of the image. Normally this tag is not necessary, since color space is specified in the colorspace information tag (<ColorSpace>).
target: The chromaticity of the white point of the image. Normally this tag is not necessary, since colour space is specified in the colourspace information tag (<ColorSpace>).

en: The color label assigned to this item. Possible values are "0": no label; "1": Red; "2": Orange; "3": Yellow; "4": Green; "5": Blue; "6": Magenta; "7": Gray; "8": Black; "9": White.
target: The colour label assigned to this item. Possible values are "0": no label; "1": Red; "2": Orange; "3": Yellow; "4": Green; "5": Blue; "6": Magenta; "7": Gray; "8": Black; "9": White.

en: The color space information tag is always recorded as the color space specifier. Normally sRGB is used to define the color space based on the PC monitor conditions and environment. If a color space other than sRGB is used, Uncalibrated is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.
target: The colour space information tag is always recorded as the colour space specifier. Normally sRGB is used to define the colour space based on the PC monitor conditions and environment. If a colour space other than sRGB is used, Uncalibrated is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.

en: The color space. One of: sRGB (used by Photoshop), CCIR-601 (used for NTSC), CCIR-709 (used for HD).
target: The colour space. One of: sRGB (used by Photoshop), CCIR-601 (used for NTSC), CCIR-709 (used for HD).

en: The date of the License Transaction.
target: The date of the Licence Transaction.

en: The date on which the license expires.
target: The date on which the licence expires.

en: The date on which the license takes effect.
target: The date on which the licence takes effect.

en: The date the intellectual content of the document was created (rather than the creation date of the physical representation), following IIM conventions. For example, a photo taken during the American Civil War would have a creation date during that epoch (1861-1865) rather than the date the photo was digitized for archiving.
target: The date the intellectual content of the document was created (rather than the creation date of the physical representation), following IIM conventions. For example, a photo taken during the American Civil War would have a creation date during that epoch (1861-1865) rather than the date the photo was digitised for archiving.

en: The distance to the subject, given in meters.
target: The distance to the subject, given in metres.

en: The illuminant used for an optional second set of color calibration tags (ColorMatrix2, CameraCalibration2, ReductionMatrix2). The legal values for this tag are the same as the legal values for the CalibrationIlluminant1 tag; however, if both are included, neither is allowed to have a value of 0 (unknown).
target: The illuminant used for an optional second set of colour calibration tags (ColourMatrix2, CameraCalibration2, ReductionMatrix2). The legal values for this tag are the same as the legal values for the CalibrationIlluminant1 tag; however, if both are included, neither is allowed to have a value of 0 (unknown).

en: The illuminant used for the first set of color calibration tags (ColorMatrix1, CameraCalibration1, ReductionMatrix1). The legal values for this tag are the same as the legal values for the LightSource EXIF tag.
target: The illuminant used for the first set of colour calibration tags (ColourMatrix1, CameraCalibration1, ReductionMatrix1). The legal values for this tag are the same as the legal values for the LightSource EXIF tag.

en: The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.
target: The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitiser or other equipment that generated the image. When the field is left blank, it is treated as unknown.

en: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in Appendix E, "Color Space Guidelines", is used as the default. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.
target: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in Appendix E, "Colour Space Guidelines", is used as the default. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.

en: The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.
target: The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitiser or other equipment that generated the image. When the field is left blank, it is treated as unknown.

en: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centered); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centered) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centered and co-sited positioning.
target: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centred); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centred) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centred and co-sited positioning.

en: The purpose of the HalftoneHints field is to convey to the halftone function the range of gray levels within a colorimetrically-specified image that should retain tonal detail.
target: The purpose of the HalftoneHints field is to convey to the halftone function the range of gray levels within a colourimetrically-specified image that should retain tonal detail.

en: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.
target: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.

en: The size in bits of each color component of a pixel. Standard Windows 32-bit pixels have 8 bits per component. One of: 8Int, 16Int, 32Int, 32Float.
target: The size in bits of each colour component of a pixel. Standard Windows 32-bit pixels have 8 bits per component. One of: 8Int, 16Int, 32Int, 32Float.

en: This Field points to a list of offsets to the quantization tables, one per component.
target: This Field points to a list of offsets to the quantisation tables, one per component.

en: This optional tag may be used to encode the JPEG quantization andHuffman tables for subsequent use by the JPEG decompression process.
target: This optional tag may be used to encode the JPEG quantisation andHuffman tables for subsequent use by the JPEG decompression process.

en: This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
target: This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public Licence for more details.

en: This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License
    as published by the Free Software Foundation; either version 2
    of the License, or (at your option) any later version.
target: This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public Licence
    as published by the Free Software Foundation; either version 2
    of the Licence, or (at your option) any later version.

en: This tag contains a 16-byte unique identifier for the raw image data in the DNG file. DNG readers can use this tag to recognize a particular raw image, even if the file's name or the metadata contained in the file has been changed. If a DNG writer creates such an identifier, it should do so using an algorithm that will ensure that it is very unlikely two different images will end up having the same identifier.
target: This tag contains a 16-byte unique identifier for the raw image data in the DNG file. DNG readers can use this tag to recognise a particular raw image, even if the file's name or the metadata contained in the file has been changed. If a DNG writer creates such an identifier, it should do so using an algorithm that will ensure that it is very unlikely two different images will end up having the same identifier.

en: This tag contains a default "look" table that can be applied while processing the image as a starting point for user adjustment. This table uses the same format as the tables stored in the ProfileHueSatMapData1 and ProfileHueSatMapData2 tags, and is applied in the same color space. However, it should be applied later in the processing pipe, after any exposure compensation and/or fill light stages, but before any tone curve stage. Each entry of the table contains three 32-bit IEEE floating-point values. The first entry is hue shift in degrees, the second entry is a saturation scale factor, and the third entry is a value scale factor. The table entries are stored in the tag in nested loop order, with the value divisions in the outer loop, the hue divisions in the middle loop, and the saturation divisions in the inner loop. All zero input saturation entries are required to have a value scale factor of 1.0.
target: This tag contains a default "look" table that can be applied while processing the image as a starting point for user adjustment. This table uses the same format as the tables stored in the ProfileHueSatMapData1 and ProfileHueSatMapData2 tags, and is applied in the same colour space. However, it should be applied later in the processing pipe, after any exposure compensation and/or fill light stages, but before any tone curve stage. Each entry of the table contains three 32-bit IEEE floating-point values. The first entry is hue shift in degrees, the second entry is a saturation scale factor, and the third entry is a value scale factor. The table entries are stored in the tag in nested loop order, with the value divisions in the outer loop, the hue divisions in the middle loop, and the saturation divisions in the inner loop. All zero input saturation entries are required to have a value scale factor of 1.0.

en: This tag contains an ICC profile that, in conjunction with the AsShotPreProfileMatrix tag, provides the camera manufacturer with a way to specify a default color rendering from camera color space coordinates (linear reference values) into the ICC profile connection space. The ICC profile connection space is an output referred colorimetric space, whereas the other color calibration tags in DNG specify a conversion into a scene referred colorimetric space. This means that the rendering in this profile should include any desired tone and gamut mapping needed to convert between scene referred values and output referred values.
target: This tag contains an ICC profile that, in conjunction with the AsShotPreProfileMatrix tag, provides the camera manufacturer with a way to specify a default colour rendering from camera colour space coordinates (linear reference values) into the ICC profile connection space. The ICC profile connection space is an output referred colourimetric space, whereas the other colour calibration tags in DNG specify a conversion into a scene referred colourimetric space. This means that the rendering in this profile should include any desired tone and gamut mapping needed to convert between scene referred values and output referred values.

en: This tag defines a matrix that maps white balanced camera colors to XYZ D50 colors.
target: This tag defines a matrix that maps white balanced camera colours to XYZ D50 colours.

en: This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimize any further processing.
target: This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimise any further processing.

en: This tag is used in conjunction with the AsShotICCProfile tag. It specifies a matrix that should be applied to the camera color space coordinates before processing the values through the ICC profile specified in the AsShotICCProfile tag. The matrix is stored in the row scan order. If ColorPlanes is greater than three, then this matrix can (but is not required to) reduce the dimensionality of the color data down to three components, in which case the AsShotICCProfile should have three rather than ColorPlanes input components.
target: This tag is used in conjunction with the AsShotICCProfile tag. It specifies a matrix that should be applied to the camera colour space coordinates before processing the values through the ICC profile specified in the AsShotICCProfile tag. The matrix is stored in the row scan order. If ColourPlanes is greater than three, then this matrix can (but is not required to) reduce the dimensionality of the colour data down to three components, in which case the AsShotICCProfile should have three rather than ColourPlanes input components.

en: This tag specifies the color space in which the rendered preview in this IFD is stored. The default value for this tag is sRGB for color previews and Gray Gamma 2.2 for monochrome previews.
target: This tag specifies the colour space in which the rendered preview in this IFD is stored. The default value for this tag is sRGB for colour previews and Grey Gamma 2.2 for monochrome previews.

en: This tag specifies the fully saturated encoding level for the raw sample values. Saturation is caused either by the sensor itself becoming highly non-linear in response, or by the camera's analog to digital converter clipping.
target: This tag specifies the fully saturated encoding level for the raw sample values. Saturation is caused either by the sensor itself becoming highly non-linear in response, or by the camera's analogue to digital converter clipping.

en: Three-chip color area
target: Three-chip colour area

en: Top-center
target: Top-centre

en: Top-center (horizontal)
target: Top-centre (horizontal)

en: Top-center (vertical)
target: Top-centre (vertical)

en: Two-chip color area
target: Two-chip colour area

en: URL for Terms and Conditions applying to the license.
target: URL for Terms and Conditions applying to the licence.

en: Unknown Nikon Color Balance 1 Tag
target: Unknown Nikon Colour Balance 1 Tag

en: Unknown Nikon Color Balance 2 Tag
target: Unknown Nikon Colour Balance 2 Tag

en: Unknown Nikon Color Balance 2a Tag
target: Unknown Nikon Colour Balance 2a Tag

en: Unknown Nikon Color Balance 2b Tag
target: Unknown Nikon Colour Balance 2b Tag

en: Unknown Nikon Color Balance 3 Tag
target: Unknown Nikon Colour Balance 3 Tag

en: Unknown Nikon Color Balance 4 Tag
target: Unknown Nikon Colour Balance 4 Tag

en: Unrecognized
target: Unrecognised

en: Unrecognized option
target: Unrecognised option

en: Unrecognized print item
target: Unrecognised print item

en: Unrecognized print mode
target: Unrecognised print mode

en: Used as a shorthand reference for the object. Changes to exist-ing data, such as updated stories or new crops on photos, should be identified in tag <EditStatus>.
target: Used as a shorthand reference for the object. Changes to existing data, such as updated stories or new crops on photos, should be identified in tag <EditStatus>.

en: Video Alpha Premultiple Color
target: Video Alpha Premultiple Colour

en: Video Color Space
target: Video Colour Space

en: Vivid Color
target: Vivid Colour

en: Vivid color
target: Vivid colour

en: WB Color Temp
target: WB Colour Temp

en: WB Gray Point
target: WB Grey Point

en: You should have received a copy of the GNU General Public
    License along with this program; if not, write to the Free
    Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
    Boston, MA 02110-1301 USA
target: You should have received a copy of the GNU General Public
    Licence along with this program; if not, write to the Free
    Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
    Boston, MA 02110-1301 USA

en: center
target: centre
